The solution of blurriness when laser cutting~

The solution of blurriness when laser cutting~

Laser cutting is widely applied in different application, and have shift it’s target audiences from only industrial to personal, and smaller business. Enhancing the operations flow, as well as fasten the production cycle. Redsail Laser is here to provide you with premium quality CO2 laser cutting machines at attractive pricings.

During the operation of the laser cutting machines, there may be problems that you might faced, especially the laser cutting is burr. This is not due to the quality of the laser cutter.

So, what is the problem? Today, I will be sharing on the problems that will likely cause the blurriness.

#1 Auxiliary gas

There are excessive particles on the materials will cause blurriness during laser cutting. When the laser cutter is operating on a workpiece, laser beam is shone on the surface of the laser cutting materials. The energy will be generated causing vaporise of the material surface, to achieve the purpose of cutting.

During laser cutting, there is a need to use auxiliary gas, to assist to quickly blow away the slag on the surface, thus the edges of the laser cutting material will be smooth.

Different auxiliary gases should be applied fro different materials. If the gas is impure or the flow is running low due to insufficient pressure, the slag will not be removed cleanly and blurriness will occur.

#2 Equipment parameters

This can be another reasons of blurriness cutting, setting the device correctly, to achieve high quality cutting edges. Such as the laser focus position should not be upper or lower, as it can cause the blurr cutting edges.

In a nutshell, investing in a Redsail Laser Cutting Machine is definitely a right choice. We support technical supports and guidance, during the set up and during the operations. Contact us now~